By default the V-Suite CORE to PCF interface outputs mandatory attributes to the PCF File. In addition to these mandatory attributes it is possible to configure the interface to output additional information. The following table provides an overview of the attributes that can be added to the pipeline header or the pipe component. PCF component attributes can be assigned from asset attributes (see Specifying PCF Component Attributes) or with a macro (see Specifying Advanced PCF Options). Pipeline header attributes can be assigned with a macro.

PCF PIPELINE HEADER INFORMATION

ATTRIBUTE1

to

ATTRIBUTE199

User defined pipeline header Information. PCF supports up to 200 user defined attributes which can be displayed on the ISOGEN drawing. Populate these attributes to add additional information to the drawing border.

PCF COMPONENT INFORMATION

COMPONENT-ATTRIBUTE1

to

COMPONENT-ATTRIBUTE10

User defined component Information. PCF supports up to 10 user defined attributes. These attributes are associated to each component in the PCF file.

PCF COMPONENT SPECIFICATION INFORMATION

INSULATION-SPEC

Component information to indicate alternative specification. Data are used to indicate specification change on ISOGEN generated drawing.

PAINTING-SPEC

PIPING-SPEC

TRACING-SPEC

PCF COMPONENT MATERIAL INFORMATION

CATEGORY

One of FABRICATION, ERECTION, OFFSHORE.

ITEM-CODE

Unique material identifier. The item code is used for component identification on the Bill of Material (BOM) generated by ISOGEN

ITEM-DESCRIPTION

Item material description

MATERIAL-LIST

One of INCLUDE, INCLUDE-WITH-ISO, EXCLUDE